F8114 ZigBee+GPRS IP MODEM is a kind of data terminal device that provides data transfer function by public GPRS and ZigBee network.
It adopts high-powered industrial 32 bits CPU and embedded real time operating system. It supports RS232, RS485 (or RS422) and ZigBee port that can conveniently and transparently connect one device to a cellular network, allowing you to connect to your existing serial and ZigBee devices with only basic configuration. It has low power consumption states in which the power consumption could be 1owerthan1mA @12VDC. It has compatible digital I/O channel, ADC, input pulse counter and pulse wave output function.
It has been widely used on M2Mfields, such as intelligent transportation, smart grid, industrial automation,telemetry,finance, POS, water supply, environment protection, post, weather, and so on.
Design for Industrial Application
1.High-powered industrial ZigBee module
2.Support low power consumption mode, including multi-sleep and trigger modes to reduce the power dissipation farthest
3.Housing: iron, providing IP30 protection
4.Power range: DC 5~35V
Stability and Reliability
1.Support hardware and software WDT
2.Support auto recovery mechanism, including online detect, auto redial when offline to make it always online
3.RS232/RS485/RS422 port: 15KV ESD protection
4.SIM/UIM port: 15KV ESD protection
5.Power port: reverse-voltage and overvoltage protection
6.Antenna port: lightning protection(optional)
Standard and Convenience
1.Adopt terminal block interface, convenient for industrial application
2.Support standard RS232 and RS485(or RS422) port that can connect to serial devices directly
3.TTL logic level RS232 interface can be customized
4.Support intellectual mode, enter into communication state automatically when powered
5.Provide management software for remote management
6.Support several work modes
7.Convenient configuration and maintenance interface
1.Support ZigBee wireless short-distance data transmission
2.Support repeater and terminal device function
3.Support Point-to-Point, Point-to-Multipoint, Peer-to-Peer and Mesh network
4.Support 65000 nodes
5.Support center node, route node and terminal node
6.Support broadcast and target address transfer
7.Support wide communication range
8.Supply 5 I/O channels, compatible 2pulse wave output channels, 3 analog inputs and 2 pulse input counters.